Machine draft:

Working principle:

The bottle is run on the conveyor chain plate, and the bottle is adjusted to the bottle. Start the label, the bottle with the chain conveyor belt forward. The bottle is released by the conveyor chain, and the bottle is fed into the bottle screw, and then the bottle is separated from the bottle by the screw in the bottle. Into the bottle star wheel itself evenly distributed with the bottle into the bottle at the end of the same pitch pitch, the rotation will be transported from the spiral of the bottles are synchronized in the star wheel groove position. The bottle is evenly dialed by the ball groove on the large turntable. In the turntable on the top of the tray is installed with the top of the same pressure bottle head pressure bottle head and tray with the same axis of the pressure, so that the bottle and the bottom of the tray to keep the steering wheel synchronization.

In the next stage of the turntable, the track cam that controls the rotation of the tray is fixed. At this point the bottle in the tray with a large turntable turntable. Rotation and turntable of the turntable

Under the track cam, in the entire turntable a week of the circle, the control of the bottle at different angles of rotation angle of rotation. So as to achieve fixed-point positioning, complete labeling, brush standard and a series of actions. When the bottle label is completed with the turntable to the bottle whistle, the pressure bottle on the turntable head lift from the bottle cap. And finally by the bottle of the wheel of the groove to the conveyor chain plate, the subsequent output to box. 

The above action power sources are from the main motor power in a series of mechanical linkage and electric in the next turntable of the next step fixed to control the tray disc rotation of the track cam. At this point the bottle in the tray with a large turntable turntable. The rotation of the turntable and the trajectory cam under the turntable controls the rotation angle of the bottle at different angles of rotation in the open circle of the whole turntable.  The above action power sources are from the main motor power in a series of mechanical linkage and electrical control with each other to complete.